LAT Electronics, Data
Acquisition & Instrument Flight SoftwareImportant: EM2 test-stand hardware components are NOT compatible with hardware supplied for EM1 test-stands. Do not mix TEM/TEM-PS/Transition Card EM1 with EM2 hardware. Hardware for EM2 is marked "EM2" on the TEM, TEM-PS, VME Transition Card and LCB supplied.
Documents:
The documents are in the process of being transferred to the LAT-DOC system for official release, please retrieve them from LATDOC's.
Here are applicable document numbers and selected copies of the documents in the release cycle (use them with caution).
Note that we do not perform impedance/short/open/voltage measurements on all pins, but test functionality of the system. The "safe-to-mate" test is the responsibility of the sub-system.
Calorimeter:
EGSE-CAL-AFEE TESTSTAND #1 shipped to NRL April 12. 04
Returned to SLAC for repair July 1, 04.
Returned to NRL July 13, 04 (see NCR error report here)
Main Document: LAT-TD-02861 EGSE Test Stand CAL AFEE
Limitations and Deviations for AFEE-Test-Stand #1 (as-built): LAT-TD-03950-02
Certificate of Compliance: EGSE-CAL-AFEE Teststand #1
Supporting Documents: Schematics, Test-Procedures, etc
Data of Supplied Test-Stands: Serial Numbers, Packages, Test-Reports, etc