LAT Electronics, Data
Acquisition & Instrument Flight SoftwareImportant: EM2 test-stand hardware components are NOT compatible with hardware supplied for EM1 test-stands. Do not mix TEM/TEM-PS/Transistion Card EM1 with EM2 hardware. Hardware for EM2 is marked "EM2" on the TEM, TEM-PS, VME Transition Card and LCB supplied.
Documents:
All documents are linked to LATDocs.
|
EGSE TEM Test Stand |
|
|
EGSE Test Stand CAL AFEE Setup |
|
|
Tower Electronics Module (TEM) LPT Procedure |
|
|
Tower Power Supply, CPT and LPT Test Procedure |
|
|
Cable Assembly, DC Power Supply Output |
|
|
Cable Assembly, VME LCB Interconnect |
|
|
Cable Assembly, Cooling Fan, TPS |
|
|
Cable Assembly, VME Power Supply Control to TPS |
|
|
Cable Assembly, DAQ/TEM-GASU COMMAND |
|
|
LCB Mezzanine Board PWB |
|
|
LCB Mezzanine Board Schematic Diagram |
|
|
Test Stand Transition Board |
|
|
Test Stand Transition Board Schematic Diagram |
|
|
Tower Electronics Module |
|
|
Assembly, Tower Electronics Module |
|
|
TEM Box Base |
|
|
TEM Box Lid |
|
|
TEM Connector Plate |
|
|
TEM Connector Pin |
|
|
Circuit Card Assembly, TEM DAQ |
|
|
Printed Wire Board, TEM |
|
|
PWB Fab, Loading and Assembly |
|
|
Connector and Cable Assembly, TEM CCA |
|
|
Schematic Diagram, TEM CCA |
|
|
Bill of Materials, TEM CCA |
|
|
VHDL, LAT TEM GTIC FPGA |
|
|
VHDL, LAT TEM GTIU FPGA |
|
|
Spacer, TEM Connector |
|
|
|
Tower Power Supply |
|
Assembly, Tower Power Supply |
|
|
Circuit Card Assembly, Tower Power Supply |
|
|
Printed Wiring Board, Tower Power Supply |
|
|
TPS Common Heat Sink Assy |
|
|
PWB Fab, Loading and Assembly |
|
|
Connector Assembly, TPS Input Power |
|
|
Connector Assembly, TPS Output Power |
|
|
Schematic Diagram, Tower Power Supply |
|
|
Bill of Materials, Tower Power Supply CCA |
|
|
TPS (PSU) Box Base |
|
|
TPS (PSU) Box Lid |
|
|
Support Cable Harness |
|
|
|
Reference |
|
GLAST TEM Tester, Schematic Diagram |
|
|
|
|