LAT Electronics, Data
Acquisition & Instrument Flight SoftwareImportant: EM2 test-stand hardware components are NOT compatible with hardware supplied for EM1 test-stands. Do not mix TEM/TEM-PS/Transition Card EM1 with EM2 hardware. Hardware for EM2 is marked "EM2" on the TEM, TEM-PS, VME Transition Card and LCB supplied.
Documents:
The documents are in the process of being transferred to the LAT-DOC system for official release and I have to get somebody to add the links on this page.
Here are copies of the documents in the release cycle (use them with caution until the line you are reading right now is removed). The docs will be replaced with links to LAT-DOCs.
Tracker:
EGSE-TKR Teststand #4 shipped to Italy
Returned to SLAC for repair August 26, 04.
Repaired: To be used at SLAC for TKR temporarily Sept 01, 04 (see NCR error report here)
Returned to INFN Sept **, 04
Main Document: LAT-TD-03605 EGSE Test Stand TKR MCM
Limitations and Deviations for Test-Stand #4 (as-built): LAT-TD-03958-01
Certificate of Compliance: EGSE-TKR Teststand #4
Supporting Documents: Schematics, Test-Procedures, etc
Data of Supplied Test-Stands: Serial Numbers, Packages, Test-Reports, etc