LAT  Electronics, Data Acquisition & Instrument Flight Software

  Subsystem Manager:  Gunther Haller

Important: EM2 test-stand hardware components are NOT compatible with hardware supplied for EM1 test-stands. Do not mix TEM/TEM-PS/Transition Card EM1 with EM2 hardware. Hardware for EM2 is marked "EM2" on the TEM, TEM-PS, VME Transition Card and LCB supplied.

Documents:

The documents are in the process of being transferred to the LAT-DOC system for official release, please retrieve them from LATDOC's.

Here are applicable document numbers and selected copies of the documents in the release cycle (use them with caution).

Tracker:

EGSE-TKR Teststand #1 delivered to SLAC Bldg. 33 on April 7, 04

EGSE-TKR Teststand #2 delivered to Italy on April 22, 04 (TEM/TPS at SLAC for testing)

EGSE-TKR Teststand #3 delivered to Italy on April 22, 04

EGSE-TKR Teststand #4 delivered to Italy on June 18, 04 (entire teststand will remain at SLAC temporarily)

EGSE-TKR Teststand #5 delivered to Italy on June 18, 04

EGSE-TKR Teststand #6 (for Thermal Vacuum) delivered to Italy on August 28, 04

EGSE-TKR Teststand #7 (for Thermal Vacuum) delivered to Italy on August 28, 04

EGSE-TKR Teststand #8 delivered to Italy on September 27, 04

EGSE-TKR Teststand #9 delivered to Italy on September 27, 04

EGSE-TKR Teststand #10 delivered to Italy on November 30, 04

- List of items received from INFN 26-Jul-2004

In addition still at UCSC:
-    1 new system just sent over with a Dawn VME crate (GLAT1099), a CPU (GLAT0991) with a piggyback card inside (LCB, GLAT0833)
      LCB-to-Transition cable (GLAT1057),  and a transition board (GLAT0198)

   (why is this not an official test-stand??)

- 22-Jul-2004 - TEM/TPS unit taken to UCSC TKR: TEM GLAT0507 and TPS GLAT0170

 
- to be returned from UCSC: older system in our VME crate with 2 COM cards, a CPU and a transition board, currently running some tests with an EM1 TEM/PS.
- to be returned from UCSC: 1 CPU card with old firmware sitting in a plastic box, not being used

- to be returned from Italy: one complete EM1 station (except the empty DAWN VME crate for a spare without VME cards)