| LAT Phase 0 Test Summary Report | ||||||
| Rev. 9AM 01/16/06 L.Wai | ||||||
| Series | Test | Purpose | P/F | Notes | Elapsed | To Go |
| LAT CPT | STR19 | AEM/ACD Clock Phase Bit Test | pass | primary side only | 14 | 0 |
| LAT CPT | GASU register test | Check for GASU errors | pass | NCR783 (redun., TEM 8 not reset), NCR785 (GEM cr_stat) | 10 | 0 |
| LAT CPT | register test - redundant GASU/PDU | Check for TEM errors | pass | NCR529 (TEM [9] TCC [2] TRC [8] TFE [23] mask readback) | 10 | 0 |
| LAT CPT | register test - primary GASU/PDU | Check for TEM errors | pass | NCR529 (TEM [9] TCC [2] TRC [8] TFE [23] mask readback) | 10 | 0 |
| LAT CPT | ACD CPT | Baseline LAT CPT | pass | NCR787 (schema reload), NCR788 (AEM temp) | 24 | 0 |
| NCR791 (TEMs all on/off), NCR793 (ACD telemetry calib) | ||||||
| NCR795 (linearity fits), NCR796 (GARC0/GAFE11 gain) | ||||||
| NCR797 (GARC8 schema typo) | ||||||
| LAT CPT | LAT CPT - TKR Section | Baseline LAT CPT | pass | NCR789 (bad chan. not read in); NCR700 (new hot chan.) | 24 | 0 |
| LAT CPT | LAT CPT - CAL Section | Baseline LAT CPT | pass | 24 | 0 | |
| LAT CPT | NCR783 Dispositions | Resolve NCR783 (redund. TEM8 reset) | in progress | 28 | 10*** | |
| Trigger | ACD Channel Uniformity | Check ROI and CNO arrival times with CI | pass | NCR800 (TEM errors, hot ACD channel) | 2 | 0 |
| Trigger | ACD Hitmap Latching | Optimize hitmap latch delay and stretch | pass | 4 | 0 | |
| Trigger | ACD CI Circuit Retriggering | Verify ACD CI circuit behavior (NCR706) | pass | 3 | 0 | |
| Trigger | CAL Channel Uniformity | CAL-LO and CAL-HI arrival times with CI | pass | 3 | 0 | |
| Trigger | CAL FLE Muon Scan | FLE threshold and trigger mask for timing | pass | ran both Byron and Lester's versions; needed script mods | 36 | 0 |
| Trigger | ACD TREQ with ext trigger | ACD ROI arrival times w/ muon tel. trig. | pass | 6 | 0 | |
| Trigger | ACD Trigger Rate Test | Optimize ROI trig. for CAL/TKR TREQ test | pass | 6 | 0 | |
| Trigger | CAL, TKR TREQ Alignment | CAL-LO, TKR arrival times w/ ROI trig. | NCR804 (error in algorithm) | 14 | 4 | |
| Trigger | ACD TREQ with TKR trigger | ACD ROI arrival times w/ TKR trig. | pass | 6 | 0 | |
| Trigger | ACD, CAL, TKR TACK Scan | Optimize TACK for all three subsystems | pass | unplanned online/offline analysis; needed script mods | 36 | 0 |
| Trigger | Trigger Efficiency | Trig eff. study for all three subsystems | use Byron's version of CAL FLE thresholds | 0 | 5 | |
| Trigger | ACD Veto Mode Run | Cosmics run w/ CAL-LO || (TKR && !ROI) | 0 | 5 | ||
| CALIB | CalibDac (CAL discriminator scans) | CAL thresholds calibration | pass | dominated by online analysis time | 9 | 0 |
| CALIB | CalibGen (CAL charge injection scan) | CAL ADC calibration | pass | cannot run acquisition during calibDac online analysis | 6 | 0 |
| CALIB | MuTrig (CAL muon data) | CAL energy calibration | pass | export directory was not optimized correctly | 13 | 0 |
| CALIB | CAL Subsystem Offline Analysis | update of threshold configurations | pass | threshold errors and delivery file format incompatibilities | 47 | 0 |
| CALIB | TE601 (TKR threshold scan) | TKR threshold calibration | pass | prerequisite for TE602, TE604, TE702 | 0** | 0** |
| CALIB | TE602 (TKR full range charge inj. scan) | TKR TOT calibration | pass | 0** | 0** | |
| CALIB | TE604 (TKR charge scan at threshold) | TKR threshold dispersion | pass | 0** | 0** | |
| TKR perf. | TE702 (TKR trigger jitter) | tracker performance test | pass | 0** | 0** | |
| SVAC | e2e B-2, B-10, B-13 (1 minute ea.) | Configuration Validation | pass | NCR806 (B-10 CAL retrigger); use B-30 instead of B-10 | 6 | 0 |
| SVAC | e2e B-13 (15 min) | SVAC data collection | pass | 2 | 0 | |
| SVAC | e2e B-30 (15 hours) | SVAC data collection | more overhead than expected; export error | 37 | 3 | |
| SVAC | e2e B-2 (4 hours) | SVAC data collection | pass | more overhead than expected | 15 | 0 |
| Totals | 395 | 17 | ||||
| ** not on the critical path | ||||||
| *** requires breaking configuration | ||||||