How to get the Software  

Last update February 04, 2003

MC Simulation 

PdrApp: download, install it and run it

  1. Go to http://www.slac.stanford.edu/exp/glast/ground/software/Releases/ReleaseList.html
  2. Get both the extlib as well as the release code following the instructions on the same page (written below)
  3. Now unzip them in a common base folder.(Almost done!!)
  4. The only change you need to make is to the setup.bat file in the path: "YOUR_BASE"/ground/pdrApp_v7r1/pdrApp/v7r1/cmt/setup.bat
  5. The change needed is -making the path of all the variables pointing to path in your tree.
  6. Only one global "Find-replace " is needed .once done you are set!! (no no wait one last step)
  7. If you forget the path and ld_library_path it may give you troubles. Double check them.
  8. If you get stuck, email me I might be able to help you. navneet@slac.stanford.edu

Choice of incident angles

angle: download, install it and run it

  1. Download angle.c compile it as c code and run it
  2. The arguments required by the program are: the coordinates (x,y,x) of the source w.r.t to the center of the LAT (see definitions in LAT-TD-00035-01) and the number of towers that you want to hit (from 1 to 4)