Using the Configuration Report
The configuration report displays some of the
register settings used during data taking and it appears as
Config in of the columns when you query the runs
database. To find more
details about configuration registers please see the
Data Analysis Primer.
Here is the current list available in the report (please let us know if you need
something added to it). Please note that currently this report is only made for
LATTE runs.
- TEM Status
- Zero Suppression ON/OFF, TEM
diagnostics ON/OFF
- Detector Thresholds
- TKR GTRC splits
- TKR GTFE thresholds in DAC units for
ranges 0 and 1
- CAL GCFE thresholds in DAC units
(LAC, FLE, FHE)
- CAL Readout range selector
discriminator
- CAL DAC for DC reference
- Trigger and Timing Registers (GEM, GLT)
- Delay from CAL trigger discriminator
to TEM trigger primitive formation
- Delay from TKR trigger discriminator
to TEM trigger primitive formation
- Stretch width of CAL trigger
primitive
- Hold trigger primitive for TEM
diagnostic latching of CAL trigger primitive
- Hold trigger primitive for TEM
diagnostic latching of TKR trigger primitive
- Width of trigger window in GEM
- Delays from trigger TACK to shaper
hold for CAL and TKR
Technical details for those who care:
For each data taking run taken with LATTE at least 2 files are
produced: the snapshot file which contain the status of ALL register and the
rcReprot.out that contain serial numbers for the flight units and other useful
information provided by the online system.